Body Repair And Trim Of 4 Wheel Vehicles

Questa applicazione spiega in dettaglio, la procedura di risoluzione sul tuo corpo macchina

Service Notice

- When removing or installing various parts, place a cloth or padding onto the vehicle body to prevent scratches.

- Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to soil or damage them.

- Apply sealing compound where necessary when installing parts.

- When applying sealing compound, be careful that the sealing compound does not protrude from parts.

- When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust prevention measures.

Removal and Installation

- When removing or installing hood, place a cloth or other padding on hood. This prevents vehicle body from being scratched.

- Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.

- Hood adjustment: Adjust at hinge portion.

- Hood lock adjustment: After adjusting, check hood lock control operation. Apply a coat of grease to hood locks engaging mechanism.

- Hood opener: Do not attempt to bend cable forcibly. Doing so increases effort required to unlock hood.

FRONT BUMPER ASSEMBLY

1. Remove clips securing engine undercover to bumper fascia.

2. Remove clips and bolts securing left and right sides of front fender protectors.

3. Remove screws and clips securing left and right sides of front fender protectors.

4. Remove clips and screws securing left and right sides of front fender protectors in wheelhouse.

5. Remove screws securing left and right front fenders to bumper fascia.

6. Remove clips securing bumper fascia.

7. Extract bumper fascia assembly, then disconnect fog lamp assembly harness connectors.

8. Remove energy absorber.

9. Remove bolts and hook securing headlamp assembly, then disconnect harness connectors.

10. Remove nuts securing bumper reinforcement to left and right bumper stays.

11. Extract bumper reinforcement.

12. Remove bolts and nuts securing front bumper bracket.

13. Remove bolts and nut securing bumper stays, then remove the bumper stays.

Fog lamp assembly

14. Remove bolt securing fog lamp assembly.

15. Extract fog lamp assembly.

REAR BUMPER ASSEMBLY

1. Remove screws securing left and right rear fenders to bumper fascia.

2. Remove screws securing left and right rear fenders to bumper fascia lower side.

3. Remove clips securing bumper fascia.

4. Remove trunk room trim. Refer to “TRUNK ROOM TRIM” for details, BT-31.

5. Working from inside trunk, remove nuts securing rear combination lamp assembly, then disconnect harness connectors.

6. Working from inside trunk, remove jack then remove nuts securing jack bracket.

7. Working from inside trunk, remove bolts securing left and right rear fenders to bumper fascia.

8. Working from inside trunk, remove nuts securing left and right rear fenders to bumper fascia.

9. Remove clips securing left and right rear bumper bracket assembly to bumper fascia.

10. Extract rear bumper fascia assembly after removing the clamps securing it.

11. Remove energy absorber.

12. Remove nuts securing bumper reinforcement to left and right bumper stays.

13. Extract bumper reinforcement.

14. Remove nuts securing bumper stays, then remove the bumper stays.

CLIP AND FASTENER

BODY FRONT END

FRONT BUMPER

BODY REAR END AND OPENER

REAR BUMPER

Front Door Glass

FRONT DOOR GLASS AND REGULATOR

Front Door Limit Switch Reset (Driver side only)

Rear Door Glass

REAR DOOR GLASS AND REGULATOR

Front Door Lock

BELL CRANK ADJUSTMENT

Rear Door Lock

OUTSIDE HANDLE ROD ADJUSTMENT

INSTRUMENT PANEL ASSEMBLY

SIDE AND FLOOR TRIM

DOOR TRIM

ROOF TRIM

TRUNK ROOM TRIM

EXTERIOR

FRONT SEAT

POWER SEAT

HEATED SEAT

Active Head Restraint

OPERATION OUTLINE

REAR SEAT

SUNROOF

WIND DEFLECTOR

DRAIN HOSES

WEATHERSTRIP

LINK AND WIRE ASSEMBLY

WINDSHIELD AND WINDOWS

DOOR MIRROR

REAR VIEW MIRROR

BODY ALIGNMENT

ENGINE COMPARTMENT

UNDERBODY

Give your assessment, is this application useful?

if useful provide the best judgment for this app

thank you

This application do not need internet connection (can be used offline)

Free download