VBE GHOST DRAW

Art Board for Paranormal Research

*** NOT DEISGNED FOR BLUESTACKS ***

FEATURES:

* Screenshot

* Numerous Colors

* EMF detection / Vibration Detection ( Devices with a Magnetometer )

* Vibration Detection ( Devices with an Accelerometer )

This application works with both Devices that Have an Magnetometer ( EMF ) and Vibration Detection ( Accelerometer ).

If you only have an Accelerometer in your device. You will still be able to use this Application in the field. However, the precise control of the Cursor movement is only available for Devices with both Sensors.

Why?

The Magnetometer ( Compass ), can be manipulated by the spirit to turn the cursor in any direction ( 360 ).

If you only have an Accelerometer. The app will change the direction of the cursor 32 times, when no vibration is detected. Thus, the amount of precision is reduced.

However, from the years of experience in the field I have. Spirits tend to use the Vibration Function over EMF abilities, do to less work involved Vibrating.

So, in short. Both functions work flawless!

Now, if your device has both a Magnetometer and an Accelerometer. You can choose which mode to use with this application, by simply clicking the associated button/s.

Always ask the spirit to use this application as shown below in the built in Help File.

HELP FILE:

Help Section.

By default this app starts by checking your Sensors in your device.

If your device has a Magnetometer and an Accelerometer. You will have EMF and Vibration use of this application. If you only have an Accelerometer. You will have Vibration Only use of this application. Both have been Proven to work in the Field.

The Buttons.

All colors and controls can be manipulated by you and the Spirit using the application. If you see a RED X over Vibration and / or EMF. Then that function is not available on your device.

You or the Spirit can swap between Vibration or EMF / Vibration by clicking on the associated Buttons ( If available ).

HOW TOO.

Simply place the Device on a flat ( Non Moving Surface ) and Click Clear / Reset .

The Device will reset and calibrate. Do not touch the Device afterwards.

Let the Spirit know to tap the device when they want to draw or select a button.

Vibration only: Spirit must wait for the arrow on the right controller to aim in the direction they want to move the cursor. Then they should tap the device to draw in order to move the cursor in that direction.

EMF / Vibration: The spirit should use one hand over the Magnetometer ( typically by the front facing camera ) to control the direction of the Cursor. Then when the spirit is ready to draw or select. The spirit should Tap the Device.

Always Remind them to Vibrate Quickly when using EMF /Vibration, as they must produce enough EMF to effect the Magnetometer Compass Direction.

#VBEGHOSTDRAW